Lighting System

Quality Assurance and Standards for External, Exterior and Outdoor Lighting System

Quality Assurance and Standards for External, Exterior and Outdoor Lighting System to be designed, installed and tested all in accordance with the recommendations of IEC, CISPR and Local Authority.

Standards for External, Exterior and Outdoor Lighting System

Luminaires shall be of the highest international quality in material, workmanship and finish and are to generally comply with IEC 60598 and the applicable CISPR recommendations. Manufacturer is to verify and certify compliance with these standards and the applicable local regulations and design standards.

Electrical Earthing or Grounding Method for Road Lighting

A. Earthing Cables: Separate protective earthing cables for lighting column circuits are to be run with power circuit, terminated at LV supply position in lighting control panel and looped into column earthing terminals. The last column is to be bonded via an earthing bolt to a single 16 mm diameter stainless steel rod, 3.6 m long, driven into ground adjacent to column. Bonding is to be 16 mm2 stranded bare copper conductor.

Methods of Installing External, Exterior and Outdoor Lighting System

Installation Methods of External, Exterior and Outdoor Lighting System includes lighting equipment luminaires, control gears, panel boards, poles, brackets, cabling, and allied minor civil works. All installations are to be carried out under strict supervision of qualified supervisors and engineers. If installation required heavy vehicles, extreme care has to be taken for preventing damages of lighting equipment, control gears and poles.