This section of Quality Plan identifies key personnel in the company concerned with the Quality plan and describes the responsibilities of these persons in relation to the system’s implementation. The project organization structure is set out in a chart form. The key staff with responsibilities in relation to quality are: Quality Assurance Manager, Project Manager, Discipline Engineer, Supervisors and Store man.
Prior to the commencement of construction on the Plot, any access or visitation to the Plot is restricted. Anyone requiring access and/or a visit to the Plot shall submit a request and obtain permission from the Master Developer's Project Manager. Any such permission will require a minimum of 24 hours notice period from the submission of the request.
The discipline Engineer shall prepare the necessary purchase order complying to the relevant company procedures:-
The Plot Developer shall submit for approval any proposed signboard complete with details and specifications. The submission must include colour drawings of the signboard and provide illumination details. Sign board size, height, layout and details shall be as per the images shown in project documentation.
Master Developer will provide site security at designated access points only. The intent of the security at access points will be to control vehicular traffic only. Additionally, several mobile security forces will travel the site on a regular basis, 24 hours a day.
The Plot Developer shall verify all measurements and be responsible for their correctness. The datum will be to as per local authority. Regardless of the availability of any survey markers on the Site, the Plot Developer shall be responsible to perform his own survey and establish survey markers and/or verify the authenticity and accuracy of the existing survey markers.
The Plot Developer shall submit for approval a Site Layout Plan showing the proposed layout of all temporary facilities. The plan shall provide details of location and size of all temporary facilities including site offices, plant, temporary utilities, sanitary facilities, materials storage areas, fabrication / assembly yards and access routes.
The master developer and the Plot Developer are to reach an agreement through which the Plot Developer provides his own General Liability and Contractor's All Risk (CAR) Insurance to be established for that specific Plot to the satisfaction of the Master Developer.
The Plot Developer shall, as part of his Site Layout Plan submission, provide details of required lay-down, storage, and staging requirements. The Plot Developer shall note that no additional storage will be available beyond the work area.
Material deliveries shall be planned to meet schedule and construction requirements. The Plot Developer shall conform to the procedures related to entry permits and authorization, as prescribed by the Master Developer or the Master Developer's Project Manager. Excess material resulting from clearing, stripping and excavation operations shall not be removed from the site without the consent of the Master Developer's Project Manager.
External, Exterior and Outdoor Lighting System includes lighting units with luminaires, lamps, ballasts, poles / support structures, and accessories and related power distribution and control, protective earthing and related builder's work including column foundations, cable pits, cable trenches and ductwork.
Construction Control Guidelines of project will help participants to establish right relationship with each other. It explains guidelines and minimum requirements that must be adhered to by developers for the duration of their construction activities. It can be listed as follows:
The extent, position, size and type of utilities shown on the Drawings issued to the Plot Developer have been based on information extracted from the records of the various public utilities, service providers, Ministries and the Project survey and must be regarded as approximate only.
All shoring and removal of, and underpinning shall be approved by the Master Developer and must comply with the safety requirements of all relevant local and international standards. Remedial underpinning shall be performed where existing foundations are inadequate. Precautionary underpinning shall be performed where new construction adjacent to an existing structure requires deeper excavation.
The Hoisting and Craneage Plan shall include a layout for all hoist/crane infrastructures. The Plot Developer should consider all detailed information such as hoist arrangements, platforms, loading deck, mast sections, hoist equipment, details of attachment to building, gates, fences, safety devices, overload protection, etc.
The air vacuum circuit breakers are of the triple pole indoor type for rated voltage 24 KV. They operate on the vacuum arc quenching principle and outstandingly cost effective. The vacuum breaker consists of the mechanism 2 housing complete with stored energy mechanism and control elements. The three poles with vacuum interrupters, cast resin insulators and bracing struts, and the operating rods connecting the mechanism with the breaker poles.
These procedures are applicable for site stores and shall be implemented along with procedures governing Main Stores and Branch Stores.
The site storekeeper reports to the Branch Stores Department /Main Stores Department through the Project Manager at site.
This method of statement specifies the detailed requirements and procedures for the installation of Power and Lighting System Wiring. Installation: No wiring be carried out until the appropriate tests required or in the electrical testing section have been done and the consultant has given his clearance for wiring to commence. A loop in form of wiring shall be used as far as practicable or unless otherwise indicated. Joints in conductors shall be made using insulated terminal blocks complying with requirements of this specification.
Method Statement For Installation Of Galvanized Conduits that has to be installed on the Exposed Surface of a building is described here. This method of statement specify the detailed requirements and procedures for the installation of Galvanized Conduits for the exposed surface installation requirement for MEP services of the above building.
This method statement explains the detailed requirements and procedures for the installation of PVC Conduits and accessories in the concrete slabs, columns, block works and concrete walls. This method statement should be used for both inside and out side the building.