Construction Specification

 

 

Mechanical, Electrical, Plumbing (MEP) in Construction Contract

MEP Works

The acronym MEP became an integral word of a building project in Middle East Gulf region during year 2000. In the inception stage of MEP, there were involvement of only two engineering branches, Mechanical and Electrical, now it included electronics, instrumentation and communication. In some occasions, Mechatronics also partake in the project for smooth completion of the whole MEP works. Companies that carry out MEP works also known as Electro-Mechanical company which has multi-faceted technicians and engineers for effective design, coordination and execution of the works.

Construction Control Guidelines for Materials Delivery and Excess Material in Site Logistics

Construction Control Guidelines for Materials Delivery and Excess Material in Site Logistics

Material deliveries shall be planned to meet schedule and construction requirements. The Plot Developer shall conform to the procedures related to entry permits and authorization, as prescribed by the Master Developer or the Master Developer's Project Manager. Excess material resulting from clearing, stripping and excavation operations shall not be removed from the site without the consent of the Master Developer's Project Manager.

Construction Control Guidelines

Construction Project

Construction Control Guidelines of project will help participants to establish right relationship with each other. It explains guidelines and minimum requirements that must be adhered to by developers for the duration of their construction activities. It can be listed as follows:

Construction Control Guidelines for Existing Services

Construction Control Guidelines for Existing Services

The extent, position, size and type of utilities shown on the Drawings issued to the Plot Developer have been based on information extracted from the records of the various public utilities, service providers, Ministries and the Project survey and must be regarded as approximate only.

Method Statement in Construction Contracts

Method Statement in Construction Contracts

Every project is unique, in particular, construction projects. There are many methods applied to accomplish functioning of individual installations included in the whole project. Building services like Mechanical, Electric, and Plumbing (MEP) work have given more importance than other disciplines dealt with. It's because of complexity and alternate methods available to accomplish the same output. While executing individual installations - also known as tasks - construction team have to adopt suitable methods submitted as an integral part of Tender. Most of the project managers or representatives of client keen to look Method Statement of critical and important tasks. We will look into what is Method Statement and what is the importance a Method Statement brings to a construction project.

Mechanical Services In MEP Construction

MEP Specification drawing for building Mechanical contract work

Particular Specification For Mechanical Services describes various general requirements In MEP Construction Work, a contractor to follow when they start executing but not limited to unforeseen work or requirements to accomplish the whole project contract.

Mechanical Ductwork, Grilles And Diffusers

MEP Mechanical Specification - ductwork support drawing

In this sample MEP specification section, Mechanical Ductwork, Grilles And Diffusers have been described in detail under construction contract work.

Main Highlights of this MEP Specification

  1. Mechanical Ductwork
  2. Mechanical Ductwork Supports
  3. Mechanical Dampers - General Requirements
  4. Flexible Joints for Mechanical Ductwork
  5. Air Intakes and Outlets
  6. Kitchen Extract Canopies
  7. Kitchen Extract Air Ductwork
  8. Access Doors
  9. Ductwork Test Points
  10. Ductwork Protection
  11. Grilles
  12. Diffusers
  13. Sand Trap Louvres
  14. Air Valves
  15. Fire Dampers

Conduit Wiring In Electrical Construction Contract Works

Electrical Power Layout Conduit Installation

Scope of Work of this this sample specification covers the supply, installation, testing and commissioning of all wiring materials for power and lighting in concealed and/or surface conduits.

1. Applicable Standards

The conduits shall conform to IS 9537 I & II  or equivalent standards. Switches, Plug Sockets shall conform to IS 3854 and IS 4615, however, contractor shall comply with the latest or superseded versions of IS/BIS to be used for the complete work.